Vaer Srl is based in San Martino in Rio (RE), in the middle of Pianura Padana. For over 30 years it has specialised in mould manifacturing and injection moulding of plastic material.
For a long time now, while offering solutions tailored on customer’s needs, it has produced and sold innovative components for wire fencing installation under the Agojet brand.

Image Alt

Faqs

GENERAL QUESTIONS

– DO I HAVE TO USE CONCRETE OR OTHER ADHESIVES WITH AGOJET SYSTEM FOR IN-GROUND APPLICATIONS (AGOJET TORX AND AGOJET TERRA) TO ENSURE THE FENCE RESISTANCE?

No, it is absolutely unnecessary. Agojet system for in-ground applications (Agojet Torx; Agojet Terra d.48-50; Agojet Terra d.60) excludes completely the use of concrete or other adhesives. Thanks to the thread size, the flexion-resistant section and the depth of insertion in the ground, each insert guarantees a fence strength according to the use instructions.

– I AM A PRIVATE CITIZEN. CAN I ORDER DIRECTLY TO YOU?

The new Agojet sales policy does not allow the direct sale to private citizens. You can send us an estimate request filling in the specific form. Our sales office and sales network will manage it for you.

– WHICH MATERIAL ARE THE INSERTS MADE OF?

All the Agojet inserts are made of 100% recyclable plastic material, resistant to erosion and weathering.

– HOW CAN I KNOW WHERE IS THE NEAREST DEALER?

You can contact us directly to agojet@vaer.it or calling at +39 0522 646585.

– I AM A SALES AGENT / DEALER INTERESTED IN THE AGOJET SYSTEM. HOW CAN I CONTACT YOU?

You can contact us calling at +39 0522 646585 or sending us an email to agojet@vaer.it . We will make you in contact with our Sales Manager.

AGOJET TORX

– CAN I USE AGOJET TORX IN ALL KIND OF SOILS?

No, you can’t. Agojet Torx is specifically designed for installations in compact (clayey or sandy) or little gravelly soils. If the ground has a stony composition we suggest to use Agojet Cemento.

– CAN I USE AGOJET TORX FOR FENCES OF ANY HEIGHT?

No, you can’t. Agojet Torx is suitable for fences up to 1.20 mt. For higher installations we suggest to use Agojet Terra that, thanks to a deeper insertion in the ground, guarantees a correct fence strength.

– CAN I USE ANY KIND OF POSTS?

Agojet Torx supports 38-diameter round posts. Posts of other sizes don’t fit the insert and do not guarantee the correct fence resistance.

– IS IT COMPULSORY TO USE AV-TORX TO INTALL IT? CAN I INSTALL IT ALSO WITH OTHER KIND OF DRILLS?

It is strictly recommended to use our nutrunner Av-Torx, specifically designed at low revs to avoid widening the pre-hole previously made to make Agojet Torx insertion in the soil easier.

– IS IT COMPULSORY TO MAKE THE PRE-HOLE?

Yes, it is. You must make it because it helps the insert enter the soil without excessively force the nutrunner. It also allows to probe the ground in order to understand its composition.

AGOJET TERRA d.48-50

– CAN I USE AGOJET TERRA D.48-50 IN ALL KIND OF SOILS?

No, you can’t. Agojet Terra d.48-50 is specifically designed for installations in compact (clayey or sandy) or moderately gravelly soils. If the ground has a stony composition we suggest to use Agojet Cemento.

– CAN I USE AGOJET TERRA D.48-50 FOR FENCES OF ANY HEIGHT?

No, you can’t. Agojet Terra d.48-50 is suitable for fences up to 1.75 mt. For higher installations we suggest to use Agojet Terra d.60.

– CAN I USE ANY KIND OF POSTS?

Agojet Terra d.48-50 supports 48/50-diameter round posts or 40×40 square posts. Posts of other sizes don’t fit the insert and do not guarantee the correct fence strength.

– CAN I USE AN EXCAVATOR OF ANY WEIGHT TO INSTALL IT?

The minimum excavator weight suggested to correctly install Agojet Terra d.48-50 is of 80 tons.

– THE INSERT IS REALLY LIGHT. HOW CAN I BE SURE OF THE FENCE RESISTANCE?

Agojet Terra d.48-50 has a flexion-resistant section that guarantees a distribution of the fence strength not just on the central cylinder, but on a wider surface. This guarantees a stable and solid fence.

AGOJET TERRA d.60

– CAN I USE AGOJET TERRA D.60 IN ALL KIND OF SOILS?

No, you can’t. Agojet Terra d.60 is specifically designed for installations in compact (clayey or sandy) or moderately gravelly soils. If the ground has a stony composition we suggest to use Agojet Cemento.

– CAN I USE AGOJET TERRA D.60 FOR FENCES OF ANY HEIGHT?

No, you can’t. Agojet Terra d.60 is suitable for fences higher than 1.75mt and up to 3mt.

– CAN I USE ANY KIND OF POSTS?

Agojet Terra d.60 supports 60-diameter round posts. Posts of other sizes don’t fit the insert and do not guarantee the correct fence strength.

– CAN I USE AN EXCAVATOR OF ANY WEIGHT TO INSTALL IT?

The minimum excavator weight suggested to correctly install Agojet Terra d.60 is of 100 tons.

– THE INSERT IS REALLY LIGHT. HOW CAN I BE SURE OF THE FENCE RESISTANCE?

Agojet Terra d.60 has a flexion-resistant section that guarantees a distribution of the fence strength not just on the central cylinder, but on a wider surface. This guarantees a stable and solid fence.

AGOJET CEMENTO

– DO I HAVE TO PUT AGOJET CEMENTO DIRECTLY IN FRESH CONCRETE?

Yes, you have to insert Agojet Cemento directly in fresh concrete keeping the correct distance between the posts you want to install. You don’t need to use any other positioning systems.

– HOW CAN I BE SURE TO INSTALL THE INSERT PERFECTLY PERPENDICULAR?

Agojet Cemento comes with a level holder that you have to put in the insert when placing it in fresh concrete. This way the insert will be installed perfectly perpendicular to the wall.

– CAN I USE ANY KIND OF POSTS?

Agojet Cemento supports 38-diameter round posts and 30×30 T-posts. Posts of other sizes don’t fit the insert and do not guarantee the correct fence strength.

– HOW CAN I BE SURE THAT THE POST IS SECURED ONCE INSTALLED?

Externally, Agojet Cemento has a self-drilling screw. We suggest to tighten it once the post is in to guarantee a better stability and safety.

– COULD THE WATER ENTER THE INSERT AND CREATE SOME PROBLEMS?

Agojet Cemento has a closing cap specifically designed to avoid water infiltrations in the insert.

AV-TORX

– CAN I USE AV-TORX TO INSTALL ALL THE AGOJET INSERTS?

No, you can’t. Av-Torx is a nutrunner specifically studied and designed to install Agojet Torx.

– WHAT MAKES AV-TORX DIFFERENT FROM ANY OTHER STANDARD DRILL?

Av-Torx is not a drill, so you can’t use it to make holes. It’s a nutrunner with an electric motor at low revs that screws the insert into the pre- hole. Furthermore, the level on the top of it guarantees a perfect positioning of the insert in the ground.

– IS IT COMPULSORY TO MAKE THE PRE-HOLE BEFORE USING AV-TORX?

Yes, it is. You must make it because it helps the insert enter the soil without excessively force the nutrunner. It also allows to probe the ground in order to understand its composition.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. In ullamcorper dolor sit.

i